NEFF T58.S1 Series, User Manual, Page: 16 / 24

en
Cookware test
16
Display Setting Value
​⁠ ​⁠ Power limitation
Enables the total power of the hob to be lim-
ited, if necessary, based on the conditions of
your electrical installation. The available set-
tings depend on the maximum power of the
hob. You can find precise information on the
rating plate. If the function is active and the
hob has reached the set power limit, ​⁠ is dis-
played and you cannot select a higher power
level. ​⁠ - Switched off. Maximum power of the hob
1
.
​⁠ - 1000 W. Lowest power setting.
​⁠. - 1500 W.
...
​⁠ - 3000 W. Recommended for 13 A.
​⁠. - 3500 W. Recommended for 16 A.
​⁠ - 4000 W.
​⁠. - 4500 W. Recommended for 20 A.
...
​⁠ - Maximum power of the hob.
​⁠ ​⁠ Time for selecting the cooking zone ​⁠ - Unlimited: You can adjust the last selected cooking
zone without having to select it again.
1
​⁠ – Limited: You can adjust the last selected cooking
zone within 10 seconds after selecting it. After this time,
you must select the cooking zone again before adjusting
it.
​⁠ ​⁠ ​⁠ PowerMove
Allows you to change the preset power levels
for the three cooking areas of the flexible
cooking zone.
Select one of the two cooking zones, set the
required power level in the settings area and
touch ​⁠ to confirm the new power level. ​⁠ - Preset power level for the front cooking zone.
​⁠ - Preset power level for the middle cooking zone.
​⁠ - Preset power level for the rear cooking zone.
​⁠ ​⁠ ​⁠ Cookware test
You can use this function to test the quality
of the cookware. ​⁠ - Not suitable.
​⁠ - Not optimal.
​⁠ - Suitable.
​⁠ ​⁠ Restoring factory settings ​⁠ - Individual settings
1
.
​⁠ - Factory settings.
1 Factory setting
18.2 To go to the basic settings
Requirement:
The hob must be switched off.
1.
To switch on the hob, touch ​⁠.
2. Within the next 10 seconds, press and hold ​⁠ for 4
seconds.
Product information Display
Directory for the technical after-sales
service (TK) ​⁠ ​⁠
Production number ​⁠ ​⁠
Production number 1 ​⁠ ​⁠.
Production number 2 ​⁠. ​⁠
a
The first four displays provide the product informa-
tion. To call up each display, turn the rotary knob
TwistPad®.
3.
Touch ​⁠ to access the basic settings.
a ​⁠ ​⁠ and ​⁠ light up as a presetting.
4.
Touch ​⁠ repeatedly until the desired setting ap-
pears.
5.
Use TwistPad® to select the required setting.
6.
Touch and hold ​⁠ for 4 seconds.
a
The settings are saved.
18.3 Discarding changes to the basic
settings
▶
Touch ​⁠.
a All changes are discarded and not saved.
19 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the size of the cookware
base corresponds to the size of the cooking zone be-
ing used.
Access is via the basic settings. →
Page 15
19.1 Carrying out Cookware test
As a single cooking zone, the flexible cooking zone is
set in such a way that only the individual item of cook-
ware is checked.
1.
At room temperature, place the cookware with ap-
prox. 200 ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.
2.
Call up the basic settings and select ​⁠ ​⁠ ​⁠.