NEFF T5 L6E Series, Instruction Manual

Page: 14 / 52

en
Before using for the first time
14
Operating the hob without the twist knob
The hob can also be operated without the twist knob:
1.
Switch on the hob using the main switch.
2.
Within the next 5 seconds, simultaneously touch and
hold the
œ
and
.
symbols for 4 seconds. An
audible signal will sound.
3.
Touch the
.
symbol repeatedly until the indicator for
the required hotplate lights up.
4.
Then set the required heat setting using the
œ
or
x
symbol.
The hotplate has now been activated.
Notes
■
The timer function cannot be activated without the
twist knob.
■
The twist knob can be placed back on the twistpad
at any time.
K
Before using for the first
time
Before using for the first time
Please read the following information before using the
appliance for the first time:
Clean the appliance and all accessory parts thoroughly.
Before you can use your new appliance, you must apply
certain settings.
Switch the hob on and off using the main switch
#
.
Setting the operating mode
The appliance is supplied with a preset air recirculation
mode.
When the hob is installed with an air outlet to the
outside, you must configure the setting
™‚ˆ
in this
mode. See section
~
"Basic settings" .