NEFF T4.SW4 Series, Instruction Manual

Page: 18 / 52

18
Familiarise yourself with the appliance
These instructions for use are applicable to other hobs. On
page 2 an overview of the models is provided, along with
information on measurements.
The control panel
Control surfaces
Pressing a symbol activates its corresponding function.
Notes
■
The settings will not change if several symbols are pressed at
the same time. This enables the programming zone to be
cleaned when food is spilt.
■
Always keep the control surfaces dry. Moisture can affect
proper functioning.
The hotplates
Residual heat indicator
The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.
Even when switched off, the
œ / • light will remain on as long as
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
œ / •
indicators and the selected power level will appear alternately.
,QGLFDWRUVIRU
SRZHUOHYHO ³ É
IXQFWLRQDOLW\ ¯
UHVLGXDOKHDW ‡ ¤
NHHSZDUPIXQFWLRQ ¥
SRZHUERRVWIXQFWLRQ Æ
7LSS3DGDQG
7LSSFRQWUROWR
VHOHFWWKHKRWSODWH
DQGWKHSRZHUOHYHO
&RQWUROSDQHOVIRU
PDLQVZLWFK
FOHDQLQJSURWHFWLRQIXQFWLRQ
¥ NHHSZDUPIXQFWLRQDQG
FKLOGSURRIORFN
Æ SRZHUERRVWIXQFWLRQ
,QGLFDWRUIRU
SODWHZDUPLQJ]RQH
&RQWUROSDQHOIRU
WLPHSURJUDP
IXQFWLRQ
Hotplate Turning on and off
$
Single hotplate Use a correctly sized pan
æ
Grill plate The plate turns on automatically when a pan large enough to reach its outer
edges is placed on it.
q
Resistive plate-warming plate* To turn on: Turn the control towards the plate-warming plate and the display
shows
‚
.
To turn off: Tilt the control towards the plate-warming plate again and ‹
appears on the display.*
* The residual heat indicator lights up.
Only use pans suitable for induction cooking, see the "Appropriate cookware" section.