NEFF T13TDF9L8, Information For Use

Page: 10 / 16

en
Automatic switch-off
10
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the preselected cooking time counts down. When the
cooking time has elapsed, the hotplate switches off
automatically.
Switch on the automatic timer in the basic settings.
→
Page 11
Tip: The automatic timer is valid for all hotplates. You
can reduce or delete the cooking time for individual
hotplates. → Page 9
8.2 Kitchen timer
You can set a time of up to 99 minutes after which a
signal will then sound. The kitchen timer runs inde-
pendently of all other settings.
Setting the kitchen timer
1. Press ⁠.
a
The light bar above lights up.
a
lights up on the timer display.
2. Within the next 10 seconds, press or ⁠.
: 5 minutes
: 10 minutes
a
The default value appears.
3. Use or to set the required time.
a
The time counts down.
a
When the time has elapsed, a signal sounds.
lights up on the timer display for 1 minute.
a
The light bar above lights up brightly.
Setting the correct time
1.
Press ⁠.
2. Use or to set the time again.
Switching off the timer signal
You can switch the signal off manually.
▶
Press any touch field.
a
The display goes out and the signal tone stops.
8.3 Stopwatch function
The stopwatch function displays the time which has
passed since activating the function.
The stopwatch function only works when the hob is
switched on. When the hob is switched off, the stop-
watch function is switched off as well.
Switching on the stopwatch function
▶
Press ⁠.
a
The light bar above lights up.
a
appears on the timer display.
a
The time measurement begins.
a
Seconds are displayed during the first minute, then
minutes.
Switching off the stopwatch function
▶
Press ⁠.
a
The timer display goes out.
9 Automatic switch-off
If you do not change the settings of a hotplate for a
long time, automatic switch-off will be activated.
When the hotplate switches off depends on the heat
setting selected (1 to 10 hours).
The heat to the hotplate is switched off. and the re-
sidual heat indicator ⁠/ flash alternately on the hot-
plate display.
9.1 Continuing cooking after automatic
switch-off
1. Press any touch field.
a
The display goes out.
2. Set the required power level for the hotplate again.
10 Keep-warm function
The keep-warm function allows you to melt chocolate
or butter and to keep food or cookware warm.
10.1 Switching on the keep-warm function
1. Use or to select the hotplate.
2.
Press ⁠.
a
lights up on the power level display.
10.2 Switching off the keep-warm function
1. Use or to select the hotplate.
2.
Press ⁠.
a
lights up on the power level display.
11 Wipe protection
Wiping over the control panel while the hob is switched
on may alter settings. Your hob has a wipe protection
function to prevent this.
The main switch is excluded from the wipe protection
function. You can switch the hob off at any time.
11.1 Activating wipe protection
▶
Press .
a
A signal tone sounds.
a
The light bar above lights up.
a
The control panel remains locked for 30 seconds.