24
Combi zone function
Using this function, the two right hotplates of the same size can
be linked together. When doing this, the same heat setting is
set for both hotplates. This is especially suitable for cooking
with oblong cookware.
Notes regarding cookware
To achieve the best results, use suitable, oval cookware in the
area of both hotplates. Position the cookware in the middle of
the hotplates.
When you are using cookware on just one of the two hotplates,
it can be moved to the second hotplate. In this case, the heat
setting and the selected settings are transferred.
Activation
The hob must be switched on.
1.
Select one of the two hotplates which are included in the
combi zone and set the heat setting.
2.
Touch the
þ
symbol. The
ò
displays light up.
The heat setting lights up in the displays for the two hotplates.
The function is activated.
Changing the power level
Change the desired power level in the programming zone.
Deactivation
Select one of the two hotplates which are included in this
function and select
‹
on the settings range.
The function is deactivated within approx. 3 seconds.
Move function
This function allows you to combine the two right-hand
hotplates of the same size and select different heat settings for
the two hotplates. Preset heat settings:
Front hotplate = heat setting
Š
Rear hotplate = heat setting
–
The heat settings can be changed independently of one
another for each hotplate.
Notes
■
Only place the cookware on one of the hotplates. The
function will not be activated if there is cookware on both
hotplates.
■
The heat setting lights up less brightly in the display for the
hotplate with no cookware; however it is not activated until
the cookware is moved onto and detected by this hotplate.
■
If the function has already been activated and a second piece
of cookware is placed on the free hotplate, the display lights
up less brightly, as before, but the hotplate is not active.
Advice on using cookware
To ensure that the cookware is detected and heat is distributed
evenly, correctly centre the cookware:
Only use one piece of cookware which only covers one
hotplate.
Moving the cookware from one hotplate to another:
Activation
Combine the two hotplates with different heat settings.
1.
Select one of the two hotplates included in the Move function.
2.
Touch the
ý
symbol. The
ò
displays light up.
The heat settings appear in the displays for the two hotplates.
The function is activated.
Note:
The display for the hotplate with the cookware lights up
more brightly.
Changing the heat setting
Select one of the two hotplates which are included in the move
function and change the heat setting in the settings range.
Note:
If the function is deactivated, the heat settings return to
the preset values
Deactivation
Touch the
ý
symbol.
The function is deactivated.
Note:
When one of the two hotplates is set to
‹
, the function is
deactivated within approx. 3 seconds.
Summary of Contents for T D28 Series
