NEFF T D28 Series, Instruction Manual

Page: 22 / 48

22
Residual heat indicator
The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching them when this
indicator is lit.
Although the hob is switched off, the indicator œ or • will
remain on for as long as the hotplate is hot.
If the pan is removed before the hotplate is turned off, the
indicator œ or • and the selected power level will appear
alternately.
Programming the hob
This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.
Turning the hob on and off
The hob is turned on and off using the main switch.
To turn on: Press the
# symbol. A beep sounds. The indicator
located next to the main switch and the ‹ indicators of the
hotplates light up. The hob is ready for use.
To turn off: press the
# symbol until the indicators go out. All
hotplates are turned off. The residual heat indicator will remain
lit until the hotplates have cooled down sufficiently.
Notes
■
The hob switches off automatically when all the hotplates are
switched off for more than 20 seconds.
■
The settings are memorised for 4 seconds after the hob has
been turned off. If the hotplate is switched back on within this
time then the previous settings will be applied.
Set the hotplate
Select the required power level with the
+
and
-
symbols.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
Selecting a hotplate and heat setting
The hob must be switched on.
1.
Select the hotplate with the
$
.
2.
Within the next 10 seconds, touch the
+
or
-
symbol. The
basic setting appears:
+
symbol: Heat setting 9
-
symbol: Heat setting 4
The heat setting is set.
Changing the power level
Select the hotplate and press the
+
or
-
symbol until the
required power level comes on.
To switch off the hotplate
Select the hotplate and then press the
+
or
-
symbol until
‹
symbol appears.
The hotplate turns off and the residual heat indicator appears.
Notes
■
If no pan has been placed on the hotplate, the selected
power level flashes. After a certain time has elapsed, the
hotplate switches off.
■
If a pan has been placed on the hotplate before switching on
the hob, it will be detected within 20 seconds of pressing the
main switch and the hotplate will be selected automatically.
Once detected, select the power level within the next
20 seconds or the hotplate will switch off.
If more than one pan is placed on the hob, only one will be
detected when switching it on.
Cooking guidelines table
The table below contains some examples.
Cooking times depend on the power level, type, weight and
quality of the food. As such they are approximate.
When heating purées, creams and thick sauces, stir
occasionally.
Use power level 9 to begin cooking.
Power level Cooking time
Melting
Chocolate, chocolate coating 1-1. -
Butter, honey, gelatin 1-2 -
* Uncovered cooking
** Uncovered
*** Turn frequently