NEFF T....5 series, Instruction Manual

Page: 26 / 48

26
To deactivate
Select the zone and press the ï symbol twice. To deactivate
the flexible zone, the ï symbol must be pressed twice within
two seconds.
Return to using two hotplates
Select one of the two hotplates of the flexible zone and set to ‹ .
Note:
When a hob is switched off and later switched on again,
the flexible zone will again be used as two hotplates.
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock
The hob should be turned off.
To activate: press the
˜ symbol for approximately 3 seconds.
The ‚ indicator lights up for 10 seconds. The hob is locked.
To deactivate: press the ˜ symbol for approximately
3 seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
All of the relevant information on the automatic childproof lock
connection can be found in the Basic settings chapter.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š
.
Restrictions when using
This function may be used for all hotplates, provided that the
other hotplate in the same group is not turned on. (See figure)
Otherwise, the
˜
and
Š
symbols will flash on the display of the
selected hotplate; then the power level is automatically set
Š
.
Note:
The greatest amount of power supplied in the flexible
zone is obtained by placing a pan in the centre of the zone, as
indicated in the Flexible zone chapter.
To activate
1.
Select the hotplate using the Tipp control.
2.
Press the
˜
symbol.
The function has been turned on.
To turn off
1.
Select the hotplate using the Tipp control.
2.
Press the
˜
symbol.
The Powerboost function has been deactivated.
Note:
In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
■
to automatically switch off a hotplate.
■
as a timer.
A hotplate should switch off automatically
The hotplate switches off automatically after the time that is set
has elapsed.
Setting the cooking time
The hob must be switched on.
1.
Use the twist knob to select the hotplate and the required
heat setting.
2.
Touch the
3
symbol. The
x
indicator for the hotplate lights
up.
‹‹
appears in the timer display.
3.
Use the twist knob to select the required cooking time.
After a few seconds, the cooking time begins to elapse.
Note:
The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The
Basic settings chapter provides information on
automatically programming the cooking time.
*URXS
*URXS