Quick and easy:
everything you need to know
about your dishwasher...
You should, however, still
read the installation and
operating instructions before
you use the dishwasher for
the first time.
Switch on the appliance
the dishwasher starts...
Switch off the appliance
that’s it...
Press the on/off switch, the cycle time
for the programme selected appears
Press the on/off switch when
the indicator shows 0 (programme end)
Pour in the water/special salt
Pour in the rinsing agent
Pour in the cleaning agent
Select the programme
Summary
of instructions
for dishwasher
9000
156 632
en
Set the water softening system *
Quickly sorted ...
Find out the water hard-
ness at your water utility
company and enter
* only before using the dish-
washer for the first time or
if the water hardness
changes
Read off the setting ...
and then set
– Hold down programme button B and switch on the main
switch, then release the buttons. The display of button B
and the number H4 set by the factory flash.
– Each time button B is depressed, the setting increases by
one; if H7 has been reached, the display jumps back to H0.
– Switch off the main switch. The selected setting has been
stored in the appliance.
Reset
A
B
C
Dissolves limescale (not required for set value 0!)
Unscrew
the lid.
Only before using
the dishwasher
for the first time
pour approx. 1 l /
2 pt water into the
salt opening.
Pour in max.
1.5 kg / 3 lb 5 oz
salt (never deter-
gent!)
Screw on the
lid. Switch on
dishwasher
immediately.
Everything is sparkling clean ...
Refill whenever level indicator is light!
Press mark 1,
lift up lid 2.
Pour in
rinse aid.
Close the
lid. CLICK!
Very dirty dishes, a lot of detergent ...
If required, open
the lid (press the
pin).
Warning,
combination
products are not
suitable for all
programmes,
follow manufac-
turer’s instructions.
Pour in
detergent.
Push the lid
shut, press.
PLOP!
Quick, economical or intensive ...
Programme overview
This overview lists the max. possible number of
programmes. The programmes supplied with your
appliance are indicated on the fascia.
The programme data are values measured in the
laboratory in compliance with Standard EN 50242.
Deviations is practice are possible.
45
_
55
_
-65
_
50
_
Duration in minutes
Electricity consumption in kWh
Water consumption in litres
with Aquasensor
Auto
Eco
Quick
Prerinse
65
_
-75
_
Auto
35
_
-45
_
Auto
105-135
1,45-1,75
–
12-20
140
1,05
12
–
70-80
0,70-0,75
–
13-18
30
0,70
10
–
19
0,05
4
–
85-140
1,00-1,60
–
9-19
Additional programmes **
Increased flexibility ...
Soak
...crockery in the lower
basket, programme
starts automatically,
remember to add an
extra 5g of cleaning
agent when the door
unlocks.
Saving time
(VarioSpeed)
... is obtained by
increased energy
consumption at
a constant cleaning and
drying performance.
** on some models
Half load
... for a few items, saves
water, energy and time
Lower basket cleaning
...Only the crockery in the
lower basket is cleaned
h.
Time selection
...switches on as soon as
you press the time
selection button:
Alters the programme
start in hourly steps
