background image

en 

Troubleshooting

50

Fault

Cause

Troubleshooting

Excessive formation of foam
occurs.

Detergent or appliance care
product used causes excess-
ive foaming.

Change the brand of detergent.

Home Connect problem

Fault

Cause

Troubleshooting

Connection to home net-
work is not established.

WLAN on router is not act-
ive.

Check the wireless network con-
nection of your router.

WLAN display is flashing.

Connection to home net-
work is not available.

Activate the wireless network con-
nection on your router.

Home Connect cannot be
implemented correctly.

Home Connect set incor-
rectly.

Please consult the documents sup-
plied for Home Connect.

Technical fault is present.

Please consult the information
about support in the documents
supplied for Home Connect.

Information on display panel

Fault

Cause

Troubleshooting

Special salt refill indicator
lights up.

Insufficient special salt.

Add "Special salt" 

→ 

Page 24

.

Sensor does not detect spe-
cial salt tablets.

Do not use special salt tablets.

Refill indicator for special
salt does not light up.

Water softening system is
switched off.

Setting the water softening system

Refill indicator for rinse aid
lights up.

Insufficient rinse aid.

1.

Add "Rinse aid" 

→ 

Page 25

.

2.

Set the amount of rinse aid to be
dispensed. 

→ 

"Setting the amount of rinse aid",

Page 26

Refill indicator for rinse aid
does not light up.

Rinse aid system is switched
off.

Set the amount of rinse aid to be
dispensed.

Malfunctions

Fault

Cause

Troubleshooting

Water is left in the appliance
at the end of the pro-
gramme.

Filter system or area under
the filters is blocked.

1.

Clean the "Filters" 

→ 

Page 40

.

2.

Clean the "Wastewater pump"

→ 

Page 53

.

Programme has not yet
ended.

Wait until the programme ends or
cancel the programme with 

Reset

.

Summary of Contents for S153ITX05G





























































Reviews: