NEFF N5 D4 Series, Instruction Manual

Page: 15 / 28

Time-setting options
en
15
O
Time-setting options
Time-setting options
Your hob has three timer functions:
■
Programming the cooking time
■
Kitchen timer
■
Stopwatch function
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
1.
Select the hotplate and the required heat setting.
2.
Touch the
x
symbol. The
x
display for the
hotplate lights up.
‹‹
lights up on the timer display.
3.
Use the
@
or
A
symbol to select the required
cooking time.
4.
Touch the
x
symbol to confirm the selected setting.
The cooking time begins to elapse.
Notes
■
The same cooking time can be set automatically for
all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically
programming the cooking time in section
~
"Basic
settings"
■
If the flexible cooking zone is selected as the only
hotplate, the set time for the entire cooking zone is
the same.
Changing or deleting the time
Select the hotplate and then touch the
x
symbol.
Use the
@
or
A
symbols to change the cooking time,
or set it to
‹‹
to delete the programmed cooking time.
When the time has elapsed
The hotplate switches off. An audible signal sounds,
‹
appears in the hotplate display and
‹‹
flashes in the
timer display for one minute. The hotplate indicator
x
flashes. Touch any symbol; the indicators go out and
the audible signal ceases.
Notes
■
If a cooking time has been programmed for several
hotplates, the shortest cooking time appears in the
timer display. The
x
indicator for the relevant
hotplate gets brighter.
■
Select the relevant hotplate to call up the remaining
cooking time for a hotplate. The cooking time is
displayed for 10 seconds.
■
You can set a cooking time of up to 99 minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure
1.
Touch the
.
symbol.
‹‹
light up in the timer
display.
2.
Touch the
@
or
A
symbols. The basic setting
appears:
Symbol
@
: 10 minutes
Symbol
A
: 5 minutes
Use the
@
or
A
symbol to set the required time.
3.
Touch the
.
symbol to confirm the selected setting.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the
.
symbol.
Use the
@
or
A
symbols to change the cooking time,
or set it to
‹‹
to delete the programmed cooking time.
Touch the
.
symbol to confirm the selected setting.
When the time has elapsed,
An audible signal sounds once the time has elapsed.
The
‹‹
symbol flashes in the timer display.
The indicators go out after you touch the
.
symbol.