25
̈
Screw in the wood screws
̈
Tighten the screws
̈
Insert the coverings via the fixing angle.
Note:
The number of the lower fastening angles depends on
the width and the design of the furniture door.
25. Fasten the finger protector
̈
Push the finger protection into the gap between the
appliance and the niche wall (1.)
̈
Clamp the finger protection to the fastening clips (2.).
̈
Clamp the holding clips under the screws.
Screw tightly.
̈
Screw the fastening angle below the lower hinge.
Push open the covering flap.