24
23. Fix the furniture door
(freezer compartment)
Important note:
Now attach the door handles which should have been
screwed from behind!
̈
Hang the furniture door on the threaded rod.
̈
Screw the nuts on the threaded rod. Do not screw
tightly!
̈
Adjust the furniture door as accurately as possible.
̈
Adjust the furniture door using the threaded rod
(Torx screwdriver). Re-examine the dimensions of
the crack continuously.
̈
Attaching the fixing angles:
Lift the furniture door somewhat from the appliance
door.
Press the upper fixing angle (without clip (1.)) on the
right and left at position
|
using the screws.
Insert the fixing angle (with clip (2.)) on the right and left
at position
~
into the fixing plate and slide over the
screws of the appliance door. Slowly lower the door in
order to repeat the procedure in
¡
.
̈
Close the door and re-examine to make sure that the
depth of the cabinet frontage corresponds with the
adjacent lying fronts. Correct if necessary.
̈
Tighten the fixing anglescrews in order to fix the depth
adjustment.
̈
Close the door and check the lateral adjustment.
Correct the adjustment by lightly banging on the edge
of the open door by hand.
̈
Screw the nuts on the adjusting rib tightly.
This way, the lateral adjustment of the door is fixed.
24. Screw on the lower fixing angle
̈
Screw on the lower fastening angles from the auxiliary
set. Pre-drill holes into the furniture door!
The lateral adjustment of the door is fixed through the
lower fastening angles.
̈
Loosen screw
̈
Check the lateral position of the door