22
Note:
–
Attach the adjusting rib with at least 10 screws on the
furniture door. One screw should be screwed in under
the threaded rod in each case.
–
The adjusting rib has a various holes for different
furniture door design variations. Always carry out
screwing jobs on the most stable part of the furniture
door.
21. Hang and align the furniture door
(freezer compartment)
Note:
The height of the cabinet frontage is set using the threaded
rod.
̈
Hang the furniture door on the threaded rod.
̈
Adjust the furniture door using the threaded rod
(Torx screwdriver)
̈
Transfer the middle drilled holes on the outside edge
of the appliance door to the furniture door.
̈
Remove furniture door.
̈
On both lengths of the furniture door, draw a parallel
with the help of the positioning aid.
̈
Lengthen the drill hole markings to the parallels using
an angle of contact.
̈
Apply the fixing plates and mark out the holes.
̈
Pre-drill the holes.
̈
Screw on the fixing plates (4x)