background image

Operating modes

 en

5

Adjust the fan speed to the amount of steam pro-
duced during cooking.

The lower the fan speed, the less energy is con-
sumed.
Only use intensive mode when required.

If cooking produces large amounts of steam, select a
higher fan speed in good time.

The odours are distributed around the room less.

Switch the appliance off when you are not using it.

The appliance does not consume any energy.

Switch off the lighting if you no longer require it.

The lighting does not consume any energy.

Clean or replace the filters at regular intervals.

The effectiveness of the appliance is increased.

Put the cooking lid on.

The cooking vapours and condensation are re-
duced.

Operating modes

Air recirculation mode

The air which is drawn in is cleaned by the grease fil-
ters and an odour filter, and conveyed back into the
room.

To bind odours in circulating-air mode,
you must install an odour filter. The dif-
ferent options for operating the appli-
ance in circulating-air mode can be
found in our catalogue. Alternatively,
ask your dealer. The required accessor-
ies are available from specialist retail-
ers, from customer service or from the
Online Shop.

Familiarising yourself with your
appliance

Familiarise yourself with the parts of your appliance.

Controls

Use the remote control to set all of the functions of
your appliance.

Tip: 

Align the remote control as precisely as possible

to the infrared receiver for the LED display.

Switch the appliance on or off

Switch on automatic mode

 1

Increase the fan setting

Decrease the fan setting

Switch the lighting on or off

Reduce the brightness

Increase the brightness

Switch the fan run-on on or off

Switch Home Connect on or off

Reset the filter saturation indicator

1

Depending on the appliance specifications

LED display

Die LED-Anzeige zeigt eingestellte Werte und Funk-
tionen.

8

1

2

3

4

5

6

7

1

Fan setting 1/grease filter saturation display

2

Fan setting 2/odour filter saturation indicator

3

Fan setting 3

4

Intensive mode 1

5

Intensive mode 2

6

Automatic mode 

 1

/fan run-on time/interval vent-

ilation

7

Home Connect

8

Infrared receiver

1

Depending on the appliance specifications

Summary of Contents for I14RBQ8W0

























Reviews: