background image

7

Trouble shooting

Malfunctions often have simple explanations. Please read the 

following notes before calling the after-sales service.

Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried 
out and damaged power cables replaced by one of our trained 
after-sales technicians. If the appliance is defective, unplug the 
appliance from the mains or switch off the circuit breaker in the 
fuse box. Contact the after-sales service.

Malfunction table

--------

Replacing bulbs

Risk of electric shock!

When changing the bulbs, the bulb socket contacts are live. 
Before changing the bulb, unplug the appliance from the mains 
or switch off the circuit breaker in the fuse box.

Important 

Only use a bulb of the same type and same power 

(see the bulb holder or rating plate inside the appliance) – to 

do this, remove the metal mesh grease filter.

Replacing halogen bulbs
Note: 

When inserting halogen bulbs, do not touch the glass 

tube. Use a clean cloth to insert the halogen bulbs.

1.

Carefully remove the bulb ring using a suitable tool.

2.

Pull out the bulb and replace it with a bulb of the same type.

3.

Insert the bulb cover.

4.

Insert the mains plug or switch on the fuse again.

LED lights

Defective LED lights may be replaced by the manufacturer, their 

customer service or a qualified technician (electrician) only.

Risk of injury!

The light emitted by LED lights is very dazzling, and can 
damage the eyes (risk group 1). Do not look directly into the 
switched on LED lights for longer than 100 seconds.

Problem

Possible cause Solution

The appliance 

does not work

The plug is not 

plugged in.

Connect the appliance to 

the electricity supply

Power cut

Check whether other 

kitchen appliances are 

working

Faulty fuse

Check in the fuse box to 

make sure that the fuse for 

the appliance is OK

The lighting 

does not work.

The bulbs are 

faulty.

For information on chang-

ing the bulbs, see the 

"Replacing Bulbs" section.

Summary of Contents for D87ER22N0B/01

















Reviews: