en
Familiarising yourself with your appliance
6
5 Familiarising yourself with your appliance
5.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
Switching the lighting on or off
Switching on fan setting 1
Switching on fan setting 2
Switching on fan setting 3
Switching on intensive mode
6 Basic operation
6.1 Switching on the appliance
▶
Set the slide control to the required fan setting.
a
The appliance starts at the selected fan setting.
6.2 Switching off the appliance
▶
Set the slide control to the zero setting.
6.3 Switching on the intensive setting
If particularly strong odours or vapours develop, you
can use intensive mode.
▶
Set the slide control to .
a
The intensive setting is switched on.
6.4 Switching off the intensive setting
▶
Set the slide control to fan setting , or .
6.5 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
▶
Press .
6.6 Switching off the lighting
▶
Press .
7 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
7.1 Cleaning products
You can obtain suitable cleaning products from after-
sales service or the online shop.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Before cleaning, pull out the mains plug or switch
off the fuse in the fuse box.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
WARNING ‒ Risk of burns!
The appliance becomes hot during operation.
▶
Allow the appliance to cool down before cleaning.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶
Do not use harsh or abrasive detergents.
▶
Do not use cleaning products with a high alcohol
content.
▶
Do not use hard scouring pads or cleaning
sponges.
▶
Only use glass cleaners, glass scrapers or stainless
steel care products if recommended in the cleaning
instructions for the relevant part.
▶
Wash sponge cloths thoroughly before use.
