background image

en

    Customer service

8

Replacing bulbs

These instructions apply to several appliance variants. It 

is possible that individual features are described which 

do not apply to your appliance.

:

Warning

Risk of burns!

Halogen bulbs become very hot when switched on. 

There is still a risk of burning for some time after they 

have been switched off. Allow the halogen bulbs to cool 

down before replacing them.

:

Warning

Risk of electric shock!

When changing the bulbs, the bulb socket contacts are 

live. Before changing the bulb, unplug the appliance 

from the mains or switch off the circuit breaker in the 

fuse box.

Important! 

Only use bulbs of the same type and 

wattage.

Replacing halogen bulbs

Note: 

When inserting halogen bulbs, do not touch the 

glass tube. Use a clean cloth to insert the halogen 

bulbs.

1.

Carefully remove the bulb ring using a suitable tool.

2.

Pull out the bulb and replace it with a bulb of the 

same type.

3.

Insert the bulb cover.

4.

Insert the mains plug or switch on the fuse again.

LED lights

Defective LED lights may be replaced by the 

manufacturer, their customer service or a qualified 

technician (electrician) only.

:

Warning

Risk of injury!

The light emitted by LED lights is very dazzling, and can 

damage the eyes (risk group 1). Do not look directly 

into the switched on LED lights for longer than 100 

seconds.

4

Customer service

Customer 

service

When calling us, please give the product number (E 

no.) and the production number (FD no.) so that we can 

provide you with the correct advice. The rating plate 

with these numbers can be found inside the appliance 

(remove the metal mesh grease filter to gain access).
You can make a note of the numbers of your appliance 

and the telephone number of the after-sales service in 

the space below to save time should it be required.

Please be aware that a visit by an after-sales engineer 

will be charged if a problem turns out to be the result of 

operator error, even during the warranty period.
Please find the contact data of all countries in the 

enclosed customer service list.

To book an engineer visit and product advice

Rely on the professionalism of the manufacturer. You 

can therefore be sure that the repair is carried out by 

trained service technicians who carry original spare 

parts for your appliances.

Accessories

(not included in the scope of delivery)

Note: 

These instructions apply to several appliance 

models. It may be the case that an optional accessory 

that is listed does not apply for your appliance.

Note: 

Observe the installation instructions in the 

accessory.

--------

E no.

FD no.

After-sales service

O

GB

0344 892 8989 

Calls charged at local or mobile rate.

IE

01450 2655 

0.03 € per minute at peak. Off peak 0.0088 € 

per minute.

Accessory

Order number

Basic equipment:

Starter set for circulating-air mode
Easy-change filter for starter set

Z54TS02X0
Z54TC02X0

Basic equipment:

CleanAir air recirculation module
Easy-change filter for CleanAir air recirculation 

module

Z54TR60X0
Z54TR00X0

Lowering frame:

Appliance width: 60 cm

Z54TL60X0

Lowering frame:

Appliance width: 90 cm

Z54TL90X0

Installation set:

Upper cabinet: 90 cm

Z54TM90X0

Handle strip: 60 cm:

Stainless steel
Black

Z54TH60N0
Z54TH60D0

Handle strip: 90 cm

:

Stainless steel
Black

Z54TH90N0
Z54TH90D0

Summary of Contents for D46ED52X0

















Reviews: