background image

 Trouble shooting  

en

7

In the dishwasher:

Note: 

If the metal mesh grease filters are cleaned in the 

dishwasher, slight discolouration may occur. This has 

no effect on the function of the metal mesh grease 

filters.

Do not clean heavily soiled metal mesh grease filters 

together with utensils.

Place the metal mesh grease filters loosely in the 

dishwasher. The metal mesh grease filters must not 

be wedged in.

Removing metal grease filter

1.

Open the lock and fold down the metal grease filter. 

While doing this, place your other hand under the 

metal grease filter.

2.

Take the metal grease filter out of the holder.

Notes

– Fat may accumulate in the bottom of the metal 

grease filter.

– Hold the metal grease filter level to prevent 

grease from dripping out.

3.

Clean the metal grease filter.

On appliances with a glass plate in the filter pull-out:

The glass plate can be removed easily and can be 

cleaned in the dishwasher.

To remove it, carefully lift the glass plate.

Installing the metal mesh grease filter

1.

Insert the metal mesh grease filter.

While doing this, place the other hand under the 

metal mesh grease filter.

2.

Fold the metal mesh grease filter upwards, locking it 

in place.

3

Trouble shooting

Trouble s

hooting

Malfunctions often have simple explanations. Please 

read the following notes before calling the after-sales 

service.

:

Warning

Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be 

carried out and damaged power cables replaced by 

one of our trained after-sales technicians. If the 

appliance is defective, unplug the appliance from the 

mains or switch off the circuit breaker in the fuse box. 

Contact the after-sales service.

Malfunction table

--------

Problem

Possible cause Solution

The appliance 

does not work

The plug is not 

plugged in.

Connect the appliance to the 

electricity supply

Power cut

Check whether other kitchen 

appliances are working

Faulty fuse

Check in the fuse box to make 

sure that the fuse for the 

appliance is OK

The lighting does 

not work.

The bulbs are 

faulty.

For information on changing 

the bulbs, see the "Replacing 

Bulbs" section.

Summary of Contents for D46ED52X0

















Reviews: