background image

 Customer service  

en

9

4

Customer service

Customer 

service

When calling us, please give the product number (E 

no.) and the production number (FD no.) so that we can 

provide you with the correct advice. The rating plate 

with these numbers can be found inside the appliance 

(remove the metal mesh grease filter to gain access).
You can make a note of the numbers of your appliance 

and the telephone number of the after-sales service in 

the space below to save time should it be required.

Please be aware that a visit by an after-sales engineer 

will be charged if a problem turns out to be the result of 

operator error, even during the warranty period.
Please find the contact data of all countries in the 

enclosed customer service list.

To book an engineer visit and product advice

Rely on the professionalism of the manufacturer. You 

can therefore be sure that the repair is carried out by 

trained service technicians who carry original spare 

parts for your appliances.

Accessories

(not included in the scope of delivery)

Note: 

These instructions apply to several appliance 

models. It may be the case that an optional accessory 

that is listed does not apply for your appliance.

Note: 

Observe the installation instructions in the 

accessory.

--------

E no.

FD no.

After-sales service

O

GB

0344 892 8989 

Calls charged at local or mobile rate.

IE

01450 2655 

0.03 € per minute at peak. Off peak 0.0088 € 

per minute.

Accessories

Order number

Basic equipment:

Starter set for circulating-air mode
Throw-away filter for starter set

Z54TS01X0
Z54TC01X0

Basic equipment:

CleanAir air recirculation module
Throw-away filter for CleanAir recirculation mod-

ule

Z54TR60X0
Z54TR00X0

Handle strip: 60 cm:

Stainless steel
Black

Z54TH60N0
Z54TH60D0

Handle strip: 90 cm

:

Stainless steel
Black

Z54TH90N0
Z54TH90D0

Summary of Contents for D46BR22X0

















Reviews: