Installation instructions
en
55
29.11 Attaching the fastening elements
In order to attach the panels, the four fastening ele-
ments must be fitted beforehand.
1.
Fold together the fastening element.
2.
Hook in the fastening element at the bottom and
press down at the top until it is in place.
Attach the red fastening elements at the top.
Attach the green fastening elements at the bottom.
29.12 Aligning the panels
ATTENTION!
Unsuitable tools may damage the surface of the appli-
ance.
▶
Only use plastic tools.
▶
Do not use pointed or sharp tools.
1.
Loosen and remove the panels with a plastic
tool, e.g. one of the other fastening elements.
2.
Turn the fastening element to the left or right to ad-
just the alignment of the panels.
3.
Refit the panels.
29.13 Removing the door handle and side
panels
ATTENTION!
Unsuitable tools may damage the surface of the appli-
ance.
▶
Only use plastic tools.
▶
Do not use pointed or sharp tools.
1.
Loosen the screws on the door handle and remove
the door handle.
2.
Remove the left- and right-hand panels using a
plastic tool.
29.14 Removing the appliance
1.
Disconnect the appliance from the power supply.
2.
Remove the left- and right-hand panels.
3.
Undo the fastening screws.
4.
Lift the appliance slightly and pull it out completely.
