NEFF C17DR00.0, User Manual And Installation Instructions

Page: 12 / 44

en
Time-setting options
12
8 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
8.1 Overview of the time-setting options
You can set a cooking time and an end time on the ap-
pliance. When you set a time on the timer, the timer will
run independently of the appliance and will not inter-
vene in its operation.
Time-setting op-
tion Use
Timer When you set a time on the timer,
the timer will run independently of
the appliance and will not inter-
vene in its operation. It does not
affect the appliance.
Cooking time If you set a cooking time, the ap-
pliance will stop heating automat-
ically once this time has elapsed.
End time Along with the cooking time (dura-
tion), you can set the time at
which you want cooking to end.
The appliance will start up auto-
matically so that it finishes cook-
ing at the required time.
Note:
If you do not apply any settings within a few
seconds, the time-setting options will automatically dis-
appear. If you have already set a cooking time, this will
be applied.
8.2 Setting the timer
You can set the timer regardless of whether the appli-
ance is on or off.
1.
Press ⁠.
2. Use the button to select the timer duration.
‒
When the appliance is switched on, first use the
button to navigate to "Timer" and then use
the button to select the timer duration.
3. Press to start the timer.
a
will appear on the display. The timer duration will
then count down.
a
Once the timer duration has elapsed, an audible sig-
nal will sound.
4.
Press the button to silence the audible signal be-
fore it is due to end.
Changing the timer
You can change the timer duration at any time.
1.
Press ⁠.
2.
Use the or button to change the timer duration.
a
The setting will then be applied.
Cancelling the timer
You can cancel the timer duration at any time.
1.
Press ⁠.
2. Use the button to set a timer duration of "00:00".
a
This cancels the current timer duration.
8.3 Setting the cooking time
Once the set cooking time has elapsed, the appliance
switches off automatically. You can only use the cook-
ing time in conjunction with a heating function.
Requirement:
A heating function and a temperature
must have been set.
1. Press ⁠.
2.
Select the default value.
Button Default value
10 minutes
30 minutes
3.
Use the or button to select the cooking time.
4.
Once the cooking time has been set, press to
start.
a The cooking time will appear on the display. The
cooking time will count down.
a Once the cooking time has elapsed, an audible sig-
nal will sound.
5. Press the button to silence the audible signal be-
fore it is due to end.
Notes
¡
When you start the Steam function , the cooking
time will not begin to count down until the set tem-
perature has been reached.
¡
If you open the appliance door while the Steam
function is in progress, the appliance will stop.
When you close the appliance door, the timer will
not resume its countdown until the appliance has
reached the set temperature again.
Changing the cooking time
You can change the cooking time at any time.
1.
Press ⁠.
2.
Use the or button to change the cooking time.
a
The setting will then be applied.
Cancelling the cooking time
You can cancel the cooking time at any time.
1.
Press .
2. Use the button to set a cooking time of "00:00".
a
This cancels the current cooking time.
3. To continue without setting a cooking time, press ⁠.
8.4 Setting the Ready by time for delayed
operation
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡
In order to achieve good cooking results, do not
delay the end time once the appliance is already in
operation.
¡
Food will spoil if you leave it in the cooking com-
partment for too long.
Requirement:
Cooking with the selected settings has
not started.
1. Place the food into the cooking compartment and
close the appliance door.
Use a suitable accessory.