Before using for the first time
en
13
K
Before using for the first
time
Before us
ing for t
he first
time
Before you can use your new appliance, you must
make some settings. You must also clean the cooking
compartment and accessories.
Before using for the first time
Before using the appliance for the first time, enquire
about the water hardness of your tap water from your
water supplier.
So that the appliance can reliably remind you to
decalcify it when required, you must correctly set your
water hardness range.
Caution!
The appliance may be damaged if unsuitable liquids are
used.
Do not use distilled water, highly chlorinated tap water
(>40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or
uncarbonated mineral water.
Notes
■
If your water is very hard, we recommend that you
use softened water.
■
If you only use softened water, you can set the water
hardness range to "softened" in this case.
■
If you use mineral water, set the water hardness
range to "4 very hard".
■
If you use mineral water, only use uncarbonated
mineral water.
Initial use
As soon as the appliance is connected to the power
supply, the first setting "Language" appears on the
display.
Setting the language
1.
Use the
&
button to navigate to the bottom line.
2.
Use the
(
or
)
button to select the language.
3.
Use the
%
button to return to "Language".
4.
Use the
)
button to select the next setting.
Setting the time
1.
Use the
&
button to navigate to the bottom line.
2.
Use the
(
or
)
button to select the current hour.
3.
Use the
&
button to navigate to the next line.
4.
Use the
(
or
)
button to select the current minute.
5.
Press the
%
button repeatedly until "Time" appears.
6.
Use the
)
button to select the next setting.
Setting the date
1.
Use the
&
button to navigate to the bottom line.
2.
Use the
(
or
)
button to select the current day.
3.
Use the
&
button to navigate to the next line.
4.
Use the
(
or
)
button to select the current month.
5.
Use the
&
button to navigate to the next line.
6.
Use the
(
or
)
button to select the current year.
7.
Press the
%
button repeatedly until "Date" appears.
8.
Use the
)
button to select the next setting.
Setting the water hardness
1.
Use the
&
button to navigate to the bottom line.
2.
Use the
(
or
)
button to select the water hardness
range.
3.
Use the
%
button to return to "Water hardness".
4.
Use the
)
button to apply the settings.
The initial use is complete.
Notes
■
You can change these settings at any time in the
basic settings.
■
After connecting the appliance to the power or
following a power cut, the settings for initial use are
shown in the display.
Water hardness range
Setting
0
0 softened
1 (up to 1.3 mmol/l)
1 soft
2 (1.3 - 2.5 mmol/l)
2 medium
3 (2.5 - 3.8 mmol/l)
3 hard
4 (above 3.8 mmol/l)
4 very hard
