en
Steam
16
Activating the "PowerBoost" function
1.
Set CircoTherm hot air
‚
or the bread baking
setting
…
and the temperature.
Note:
Set a temperature above 100 °C to allow the
appliance to preheat quickly.
2.
Place the food on a single level in the cooking
compartment.
3.
Touch the
#
touch button to start the appliance
operation.
4.
Touch the
°
touch button to activate the
"PowerBoost" function.
The
°
symbol appears on the display.
Once the set temperature has been reached, the
"PowerBoost" function switches itself off
automatically. The
°
symbol disappears from the
display.
`
Steam
Steam
Food can be cooked particularly gently using steam.
With some heating modes, you can prepare food with
steam assistance. In addition, the Dough proving,
Defrost and Reheat heating modes are available.
:
Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
Noise
Pump
You will hear a humming noise while the pump is in
operation and after switching it off. This noise is caused
by the pump function test. It is a normal operating
noise.
Control panel
You will hear a humming or clicking noise when
opening the control panel. These noises are caused by
the control panel being pushed out. They are normal
operating noises.
FullSteam – Steam cooking
During steaming, hot steam surrounds the food and
therefore prevents loss of nutrients from the food. The
shape, colour and typical aroma of the dishes are
retained as a result of this preparation method.
Note:
If the water tank runs dry during steaming,
operation is interrupted. Fill the water tank.
Starting
1.
Touch the
#
touch button.
2.
Fill the water tank.
Note:
Only switch on steaming once the cooking
compartment has cooled down completely (to room
temperature).
3.
Touch the
0
touch button.
4.
Swipe to the left or right to select "Steam
‹
".
5.
Touch the bottom line.
6.
Swipe to the left or the right to select the required
temperature.
7.
Touch the bottom line.
8.
Swipe to the left or the right to select the required
duration.
9.
Touch the
#
touch button.
The appliance starts the operation.
As soon as the cooking time has elapsed, an audible
signal sounds and the appliance ends the operation
automatically. Touch the
0
touch button to end the
audible signal.
Summary of Contents for B48FT38 0B Series
Page 1: ...en INSTRUCTION MANUAL Built in oven B48FT38 0B...
Page 2: ......
