NEFF B47VS34 0B Series, User Manual And Installation Instructions, Page: 19 / 48

Rapid heat-up
en
19
Requirement:
The appliance must be switched on.
1.
Press ⁠.
2. Use the or button to select "MyProfile" ⁠.
3.
Use the button to navigate to the next row.
4. Use the or button to select "Automatic childproof
lock".
5. Use the button to select the required settings.
6.
Use the button to set the lock to "Activated".
7. Press ⁠.
8.
Use the button to save your settings.
a When you switch off the appliance, will appear
on the display.
12.3 Interrupting the automatic
childproof lock
1.
Press and hold the button until "Childproof lock
deactivated" appears on the display.
2.
Press to switch the appliance on and then start it
up.
12.4 Deactivating the automatic
childproof lock
1.
Press and hold the button until "Childproof lock
deactivated" appears on the display.
2.
Press to switch the appliance on.
3.
Press ⁠.
4.
Use the or button to select "MyProfile" ⁠.
5.
Use the button to navigate to the next row.
6.
Use the or button to select "Automatic childproof
lock".
7.
Use the button to select the required settings.
8.
Use the button to set the lock to "Deactivated".
9.
Press ⁠.
10.
Use the button to save your settings.
12.5 Activating the one-time childproof
lock
The one-time childproof lock disables the control panel
to prevent children from accidentally switching on the
appliance. To switch on the appliance, deactivate the
one-time childproof lock. After you have switched off
the appliance, the control panel will no longer be dis-
abled.
Note:
When you activate the automatic childproof lock,
the appliance will immediately disable the control
panel. The and buttons will not be disabled.
▶
Press and hold the button until "Childproof lock
activated" appears on the display.
12.6 Deactivating the one-time
childproof lock
▶
Press and hold the button until "Childproof lock
deactivated" appears on the display.
13 Rapid heat-up
You can use the "Rapid heat-up" and "PowerBoost" functions to reduce the heat-up time. Whether the appliance is
preheated with the "Rapid heat-up" function or the "PowerBoost" function depends on the heating function that has
been set.
13.1 Rapid heat-up and PowerBoost
Function Heating function Food in the cooking compartment
Rapid heat-up Top/bottom heating After preheating
PowerBoost
¡
CircoTherm hot air
¡
Bread-baking setting
Before heating up
Only cook on one level
13.2 Activating the "Rapid heat-up"
function
1.
Set Top/bottom heating and a temperature of at
least 100 °C.
2.
Press to start.
a
The button will be lit.
3.
Use the button to activate the "Rapid heat-up"
function.
a
will appear on the display.
a
Once the set temperature has been reached, the
"Rapid heat-up" function will switch itself off auto-
matically and an audible signal will sound. will go
out on the display.
4.
Place the food in the cooking compartment.
13.3 Deactivating the "Rapid heat-up"
function
▶
Use the button to deactivate the "Rapid heat-up"
function early.
13.4 Activating the "PowerBoost"
function
1. Place the food on a single level in the cooking com-
partment.
2. Set CircoTherm hot air or the Bread-baking set-
ting and a temperature of at least 100 °C.
3. Press to start.
a
The button will be lit.
4.
Press the button to activate the "PowerBoost"
function.
a will appear on the display.