Programmes
en
25
P
Programmes
Programmes
You can prepare food very easily using the various
programmes. You select a programme and enter the
weight of your food. The program then applies the most
suitable settings.
To achieve good results, the cooking compartment
must not be too hot for the type of food you have
selected. If it is, a message will appear on the display.
Allow the cooking compartment to cool down and start
again.
Information on the settings
■
The cooking result depends on the quality of the
food and the type of cookware used. For best
results, only use high-quality food and refrigerated
meat.For frozen products, only use food directly from
the freezer.
■
For some dishes, you will be required to enter the
weight. The appliance will then apply the time and
temperature settings for you.
It is not possible to set weights outside the intended
weight range.
■
For roasting programmes, for which the appliance
applies the temperature selection, temperatures can
be as high as 300 °C. Therefore ensure that you are
using heat-resistant cookware.
■
Information about cookware, shelf position or adding
liquid for meat is provided for you. For some dishes,
the food needs to be turned or stirred during
cooking. This is shown briefly on the display after the
start. A signal reminds you to do this at the right
time.
■
Information about suitable cookware and preparation
tips and tricks can be found at the end of the
instruction manual.
Steam
For the steam programme, the appliance provides you
with programmes you can use to prepare your meals
easily and professionally.
Information about the steam functions can be found in
the relevant sections.
:
Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
Selecting a dish
The following table shows the corresponding setting
values for the listed dishes.
Setting a programme
You will be guided through the entire setting process for
your chosen food.
1.
Touch the
#
touch button to switch on the
appliance.
2.
Touch the
0
touch button.
3.
Use the
(
or
)
button to select "Steam programmes".
4.
Use the
&
button to navigate to the next line.
5.
Use the
(
or
)
button to select the required meal
category.
6.
Use the
&
button to navigate to the next line.
7.
Use the
(
or
)
button to select the required steam
programme.
8.
Use the
&
button to navigate to the next line.
The settings for this dish appear on the display.
Note:
For some meals, you can also display notes,
e.g. on the shelf height and cookware. Touch the
)
button to do this. To return to the settings, touch the
(
button.
9.
If required, you can adjust the weight for some
meals. Touch the
&
button to do this.
Use the
(
or
)
button to set the weight.
10.
Touch the
#
touch button to start the appliance
operation.
The estimated cooking time is shown.
Note:
For some programmes, the displayed cooking
time may change during the first few minutes, as the
heating-up time depends on the temperature of the
food and the water, amongst other things.
As soon as the cooking time has elapsed, an audible
signal sounds and the appliance ends the operation
automatically. Touch the
0
touch button to end the
audible signal.
Some programmes offer you the opportunity to continue
cooking your dish.
When you are happy with the cooking result, use the
%
button to select "End".
Dishes
White bread, without a tin
Wheat bread, multi-grain wheat bread in loaf tin
Flatbread
Plaited loaf, unfilled/savarin
Fatless sponge cake
Pork neck joint, boned
Top side, top rump
Leg of lamb
Chicken, whole, fresh
Chicken portions, fresh
Goose, duck, unstuffed, fresh
Fish fillet
Whole fish
Reheat cooked side dishes
