en
Steam
18
Starting
1.
Touch the
#
touch button.
2.
Refill the water tank.
3.
Set the heating mode and temperature.
4.
Touch the
Ž
touch button to switch on steam
assistance.
5.
Use the
&
button to navigate to the line with steam
assistance
Ž
.
6.
Use the
(
or
)
button to select the steam intensity.
7.
Touch the
#
touch button.
The appliance starts the operation.
Note:
If the water tank runs dry during an operation with
steam assistance, a message appears on the display
prompting you to fill up the water tank. The operation
continues without adding steam.
Cancelling steam addition
Touch the
Ž
touch button to cancel the addition of
steam early.
Note:
The operation continues without adding steam.
Cancelling appliance operation
Press and hold the
#
touch button until the appliance
operation is cancelled.
Finishing
Touch the
#
touch button to switch the appliance off.
Dough proving setting
Dough will prove considerably more quickly using the
"Dough proving
Œ
" heating mode than at room
temperature and does not dry out.
There are two levels available for the Dough proving
setting. Use the information in the tables to select the
"Tested for you in our cooking
Note:
If the water tank runs dry during operation with
the Dough proving setting, operation is interrupted. Fill
the water tank.
Starting
1.
Touch the
#
touch button.
2.
Refill the water tank.
Note:
Only switch on Dough proving once the
cooking compartment has completely cooled down
(to room temperature).
3.
Use the
(
or
)
button to select "Dough proving
Œ
".
4.
Use the
&
button to navigate to the next line.
5.
Use the
(
or
)
button to select the level.
6.
Use the
&
button to navigate to the next line.
7.
Use the
(
or
)
button to select the cooking time.
8.
Touch the
#
touch button.
The appliance starts the operation.
As soon as the cooking time has elapsed, an audible
signal sounds and the appliance ends the operation
automatically. Touch the
0
touch button to end the
audible signal.
Cancelling
Press and hold the
#
touch button until the appliance
operation is cancelled.
Finishing
Touch the
#
touch button to switch the appliance off.
Reheating
With the "Reheat
¨
" heating mode, you can gently
reheat food that has already been cooked or crisp up
day-old baked goods. Steam is switched on
automatically.
Note:
If the water tank runs dry during operation with
the Reheat setting, operation is interrupted. Fill the
water tank.
Starting
1.
Touch the
#
touch button.
2.
Refill the water tank.
3.
Use the
(
or
)
button to select "Reheat
¨
".
4.
Use the
&
button to navigate to the next line.
5.
Use the
(
or
)
button to select the temperature.
6.
Use the
&
button to navigate to the next line.
7.
Use the
(
or
)
button to select the cooking time.
8.
Touch the
#
touch button.
The appliance starts the operation.
As soon as the cooking time has elapsed, an audible
signal sounds and the appliance ends the operation
automatically. Touch the
0
touch button to end the
audible signal.
Cancelling
Press and hold the
#
touch button until the appliance
operation is cancelled.
Finishing
Touch the
#
touch button to switch the appliance off.
Filling the water tank
The water tank is located behind the control panel.
Before starting an operation with steam, open the
control panel and fill the water tank with water.
Make sure that you have set the water hardness range
:
Warning – Risk of injury and risk of fire!
Only fill the water tank with water or with the descaling
solution that is recommended by us. Do not pour any
flammable liquids (e.g. alcoholic drinks) into the water
tank. Due to hot surfaces, vapours from flammable
liquids may catch fire in the cooking compartment
(explosion). The appliance door may spring open. Hot
steam and jets of flame may escape.
:
Warning – Risk of burns!
The water tank may heat up while the appliance is in
operation. Wait until the water tank has cooled down
after the previous appliance operation. Remove the
water tank from the water tank recess.
