NEFF B47CR32.0B, User Manual And Installation Instructions

Page: 19 / 36

Appliance door
en
19
2.
Pull the whole rail to the front and remove it.
3. Clean the rail.
→
"Cleaning products", Page 15
15.2 Attaching the rails
Notes
¡
The rails only fit on the right or left.
¡
For both rails, ensure that the retaining bracket is at
the front.
1.
First, push the rail into the middle of the rear
socket until the rail rests against the cooking
compartment wall, and then push this back ⁠.
2.
Push the rail into the front socket until the rail
also rests against the cooking compartment wall,
and then press this downwards ⁠.
16 Appliance door
To clean the appliance door thoroughly, you can disas-
semble the appliance door.
WARNING ‒ Risk of injury!
If the hinges are not secured due to an incomplete
lock, they can snap shut with great force.
▶
To detach or attach the appliance door, always turn
the two locks as far as they will go.
▶
If the hinge snaps closed when detaching or attach-
ing the appliance door, do not reach into the hinge
– call the after-sales service.
16.1 Detaching the appliance door
Requirements
¡
Have a torch ready.
¡
Have a small slotted screwdriver ready.
¡
Have a coin ready.
1.
To make it easier to see the door lock, shine the
torch into the gap beside the appliance door.
2.
Hold the screwdriver horizontally and use it to
push the door lock (black component) on each side
of the door upwards as far as it will go ⁠.
Door lock open
Door lock closed