background image

en 

Accessories

8

4.7 Cooking compartment

The functions in the cooking compartment make your
appliance easier to use.

Rails

The rails in the cooking compartment enable you to
place accessories at different heights.

→ 

"Accessories", Page 8

Your appliance has four shelf positions. The shelf posi-
tions are numbered from bottom to top.
You can remove the rails, e. g. for cleaning. 

→ 

"Shelf supports", Page 16

Lighting

The oven light lights up the cooking compartment.
With most types of heating and functions, the lighting
lights up during operation. When the function selector
is turned to bring operation to an end, the lighting goes
out.
The 

Oven light

 setting on the function selector can be

used to switch on the light without heating.

Cooling fan

The cooling fan switches on and off depending on the
appliance's temperature. The hot air escapes above
the door.

ATTENTION!

Do not cover the ventilation slot above the appliance
door. The appliance overheats.

Ensure that the ventilation slots are unobstructed.

To ensure that the appliance cools down more quickly
after operation, the cooling fan continues to run for a
certain period afterwards.

Appliance door

If you open the appliance door during operation, the
operation continues.

5 

Accessories

Only use original accessories. These have been made
especially for your appliance. Here you can find an
overview of your appliance's accessories and how to
use them.

Note: 

Accessories may become deformed if they get

hot. Deformation has no effect on function. As the ac-
cessory cools down, it will regain its original shape.

The accessories supplied may differ depending on the
appliance model.

accessories

Use

Wire rack

¡

Cake tins

¡

Ovenproof dishes

¡

Cookware

¡

Meat, e.g. roasting joints or steak

¡

Frozen meals

Universal pan

¡

Moist cakes

¡

Baked items

¡

Bread

¡

Large roasts

¡

Frozen meals

¡

Catching dripping liquids, e.g. fat when
grilling food on the wire rack.

5.1 Locking function

The locking function prevents the accessories from tilt-
ing when they are pulled out.
You can pull out the accessories approximately halfway
without them tipping. The accessories must be inserted
into the cooking compartment correctly for the tilt pro-
tection to work properly.

5.2 Sliding accessories into the cooking
compartment

Always slide accessories into the cooking compartment
correctly. This is the only way to ensure that accessor-
ies can be pulled out approximately halfway without tip-
ping.

1.

Turn the accessories so that the notch   is at the
rear and is facing downwards.

2.

Insert accessories between the two guide rods for
the shelf position.

Summary of Contents for B3ACE2A.0

































Reviews: