background image

Familiarising yourself with your appliance

 en

7

Symbol

Type of heating

What it's used for/how it works

CircoTherm gentle

Cook selected dishes gently on one level without preheating.
The fan distributes the heat from the ring-shaped heating element in the back
wall evenly around the cooking compartment. The food is cooked in phases us-
ing residual heat.
Select a temperature of between 120 °C and 230 °C.
Always keep the appliance door closed when cooking.
This type of heating is used to determine the energy consumption in air recircu-
lation mode and the energy efficiency class.

Pizza setting

Cook pizza or dishes that require a lot of heat from below.
The bottom heating element and the ring-shaped heating element in the back
wall heat the cooking compartment.

Bottom heating

Final baking or cooking food in a bain marie.
Heat is emitted from below.

Full-surface grill

Grill flat items such as steak and sausages, or make toast. Gratinate food.
The entire area underneath the grill element becomes hot.

Circo-roasting

Roast poultry, whole fish and larger pieces of meat.
The grill element and the fan switch on and off alternately. The fan circulates the
hot air around the food.

Top/bottom heating

Traditionally bake or roast on one level. This type of heating is ideal for cakes
with moist toppings.
The heat is emitted evenly from above and below.
This type of heating is used to measure the energy consumption in the conven-
tional mode.

4.5 Functions

Here you can find an overview of the functions. Use the function selector to set the functions.

Symbol

Name

Use

Rapid heating

Rapidly preheat the cooking compartment without accessories. 

→ 

"Rapid heating", Page 12

Oven light

Illuminate the cooking compartment without heating. 

→ 

"Lighting", Page 8

EasyClean

EasyClean   removes light dirt from the cooking compartment. 

→ 

"Cleaning aid EasyClean ", Page 15

4.6 Temperature and setting levels

There are different settings for the types of heating and functions.

Note: 

For temperature settings above 250 °C, the appliance reduces the temperature to approx. 240 °C after ap-

prox. 10 minutes. If your appliance has the top/bottom heating or bottom heating types, this temperature reduction
does not take place.

Symbol

Function

Use

Zero setting

The appliance does not heat up.

50–275

Temperature range

Set the temperature in the cooking compartment in °C.

EasyClean

Set the cleaning aid.

Grill, intensive

The maximum temperature that can be set for 

Full-surface grill

 and 

Grill, small

area

 (depending on the appliance type).

Heat-up indicator

The appliance indicates when it is heating up.
When the appliance is heating, the   symbol lights up
on the display. This symbol goes out when heating is
paused.

When you are preheating the appliance, the optimal
time to place your food in the cooking compartment is
when the symbol first goes out.

Note: 

Due to thermal inertia, the temperature displayed

may differ slightly from the actual temperature inside
the cooking compartment.

Summary of Contents for B3ACE2A.0

































Reviews: