NEFF B1ACE4H.0B, User Manual And Installation Instructions

Page: 18 / 32

en
Appliance door
18
4.
Remove the pull-out rail.
5. Clean the pull-out rail.
→
"Cleaning products", Page 14
14.4 Attaching the pull-out rail
Note:
The pull-out rails only fit on the right or left. Make
sure when you fit them that you can pull them out to-
wards the front.
1.
Insert the pull-out rail between the two bars.
2.
Push the retainer in between the lower and the
upper bar.
3.
Keep the
PUSH
tab pushed in and swing the pull-
out rail inwards until the front retainer is located
between the two bars ⁠.
‒
Release the
PUSH
tab.
a
The retainer clicks into place.
4. Pull the pull-out rail out as far as it will go and slide
it back in.
15 Appliance door
To ensure that your appliance retains its appearance
and remains fully functioning for a long time, you can
detach the appliance door and clean it.
15.1 Detaching the appliance door
WARNING ‒ Risk of injury!
Components inside the appliance door may have sharp
edges.
▶
Wear protective gloves.
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶
Keep your hands away from the hinges.
1.
Open the appliance door fully.