Cleaning function
en
19
.
Cleaning function
Cleaning
function
Your appliance is equipped with EcoClean and the floor
cleaning aid. The self-cleaning surfaces in the cooking
compartment are cleaned with the "EcoClean" cleaning
function. Use the floor cleaning aid for intermediate
cleaning of the cooking compartment floor. Dirt is
softened beforehand using the floor cleaning aid. It can
then be removed more easily.
EcoClean
The self-cleaning surfaces in the cooking compartment
are cleaned with the "EcoClean" operating mode.
The self-cleaning surfaces (back panel, ceiling panel
and side panels) are coated with a porous, matt
ceramic material. This coating absorbs and breaks
down splashes from baking, roasting and grilling while
the oven is in operation. If the surfaces no longer clean
themselves adequately and dark patches appear, the
surfaces can be cleaned by the cleaning function.
Note:
The appliance records the number of times it is
used.The appliance indicates when it has reached a
point in time after which cleaning is recommended. The
recommendation is displayed until the cleaning function
has finished.
If you do not act on this recommendation, the self-
cleaning surfaces may become damaged.
If your appliance is already prematurely very dirty or if
you notice dark patches on the back panel, do not wait
until your appliance recommends cleaning to do so.
This is because the more often the appliance is
cleaned, the longer the self-cleaning surfaces will retain
their cleaning capability. You can clean your appliance
at any time as required using the cleaning function.
Prior to initiating the cleaning function
Remove shelves, rails, accessories and ovenware from
the cooking compartment.
Cleaning the cooking compartment floor and the
inside of the appliance door
Remove the worst dirt from the cooking compartment
floor, the inside of the appliance door and the interior
lighting. Otherwise, patches will appear that can no
longer be removed.
Caution!
Do not use oven cleaner on the self-cleaning surfaces.
This will damage the surfaces. If oven cleaner does
come into contact with these surfaces, dab it off
immediately with water and a sponge cloth. Please to
not rub or use any abrasive cleaning materials.
Starting
Before setting the cleaning function, ensure that you
have followed all instructions for preparation.
The duration for the cleaning function is preset to 1
hour. It cannot be changed.
1.
Touch the
#
touch button.
2.
Touch the
0
touch button.
3.
Use the
(
or
)
button to select "EcoClean
™
".
4.
Use the
&
button to navigate to the next line.
The cleaning time with EcoClean is displayed.
5.
Use the
&
button to navigate to the next line.
6.
Touch the
#
touch button.
The appliance starts EcoClean. The remaining time
appears on the display.
Keep the kitchen ventilated while the cleaning function
is running.
As soon as the cleaning aid has finished, an audible
signal sounds and the appliance ends the operation
automatically.
Once the cleaning function has ended
Once the cooking compartment has cooled down, wipe
down the cooking compartment with a damp cloth if
necessary.
Note:
During operation and while the cleaning function
is active, reddish patches may form on the surfaces.
This is not rust, but food residues. These patches are
not hazardous to your health and do not limit the
cleaning capacity of the self-cleaning surfaces.