Nederman SAVE 73009058, Original User Manual

Page: 28 / 44

SAVE EN
28 QMM095(A)
Table 6-1: Maintenance
Description Interval
Electrical connection Annually
Settings of protections Annually
Cables and wires condition Annually
Remove dust and dirt from electrical panel Annually
6.2 Re-start after repair
Launch in accordance with the normal start-up procedure, paying particular
attention to the process. Control the proper functioning of the components of
the installation, which have been fixed or regulated. In case if the defect is still
observed, shut down the installation immediately.
6.3 Spare parts
CAUTION! Risk of equipment damage
Use only Nederman original spare parts and accessories.
Contact your nearest authorized distributor or NEDERMAN for advice on
technical service or if you require help with spare parts. See also:
www.nederman.com
Ordering spare parts
When ordering spare parts always state the following:
• Part number and control number (see the product identification plate).
• Position number and name of the spare parts (see www.nederman.com)
• Quantity of the parts required.
Other optional items
Please contact NEDERMAN Service Dept. for details related to nonstandard
items.
Table 6-2: Spare part list
Fig./pos. Description Item number
2/4 Industrial PC panel 10.4” 73009253
2/1 and 4/1 Antenna*
7945188
1/2 SAVE Module 73009059
1/3 SAVE Sensor 73009059
* For SAVE Controller and SAVE Module
7 Recycling
The product has been designed for component materials to be recycled. Its
different material types must be handled according to relevant local regulations.
Contact the distributor or Nederman if uncertainties arise when scrapping the
product at the end of its service life.