Nederman L-PAK Series, Manual, Page: 12 / 17

L-PAK 150/250 Standard EN
12
6 PLC settings
6.1 Find a parameter and set its value
ESC OK
NEDERMAN
Hi Vacum Unit
L-PAK Standard
OFF
TimeTo Service
2000 Hours
ESC OK
Thu 10:45
2018-02-01
ESC OK
Stop >
>
Setup >
Network >
Diagnos ti cs >
Program
ESC OK
Set Parameter
Program Name
ESC OK
H-Meter >
ZV-Detect >
SSR_Time >
DIRTmr >
OTTmr Z
WeekTmr >
Do the following to find a parameter and set its value:
1. From the PLC status screen, press the down arrow to go to the date and time
screen.
2. Press ‘Escape’
ESC
to go to the main menu.
3. Press the down arrow to go to ‘ Program’ . Press ‘OK’
OK
to confirm.
4. Select ‘Set Parameter’ . Press ‘OK’
OK
to confirm.
5. Use the up or down arrows to find the parameter. Press ‘OK’
OK
to confirm.
6. Use the left and right arrows to select a value.
7. Use the up or down arrows to set the value. Press ‘OK’
OK
to confirm.
8. Press ‘Escape’
ESC
to go to the main menu.
9. Press ‘Escape’
ESC
to go to go to the date and time screen.
10. Press the up arrow to exit.
NOTE!
There are several other input menus on the same level as the date and time screen.
If pressing the down arrow takes the PLC to one of those menus, use the left arrow to
get to the date and time screen.
NOTE! The blinking cursor shows the current value that can be changed.