FlexPAK
3.1.5 Filter Cleaning
The unit is cleaning its filter.
ESC
OK
Filter
Cleanining
Cycles
1
Elapsed
0
Clean
00:00 s
Charge
00:00 s
Cycles: How many cleaning pulses will be carried out.
Elapsed: How many cleaning pulses are made.
Clean: Remaining time for cleaning pulse.
Charge: Remaining vacuum build time; the time until cleaning pulse is activ-
ated.
3.1.6 Emptying pre-separator
The time remaining until the pre-separator bin is to be emptied.
ESC
OK
EMPTYING
Preseparator
Bin 1 08:00s
Bin 2 06:00s
Bin 1: The time remaining to empty the pre-separator as set in BinOpnTm.
Bin 2: The time remaining for pre-separator 2 to be emptied as set in Pre-
sepTm.
3.1.7 Open Upper Slide Valve V12
The message appears when the TVFD Upper Solenoid Valve is expected to open. The timer is set with TVF-
. If the timer elapses, the ‘TVFD Alarm! Upper Slide Not Open is activated.
This message is only shown when TVFD advanced is activated.
ESC
OK
Open Upper
Slide Valve
Remaing time
06:00s
Remaining Time: The remaining time for the valve to open before the alarm
is activated.
3.1.8 Close Upper Slide Valve V12
The message appears when the TVFD Upper Solenoid Valve is expected to close. The timer is set with TVFDC-Al,
. If the timer elapses, the ‘TVFD Alarm! Upper Slide Not Closed is activated. This
message is only shown when TVFD advanced is activated.
ESC
OK
Close Upper
Slide Valve
Remaing !me
08:00s
Remaining Time: The remaining time for the valve to close before the alarm
is activated.
3.1.9 Emptying bin TVFD Advanced
The message appears when the TVFD Lower Solenoid Valve is expected to open. The timer is set with TVF-
. If the timer elapses, the ‘TVFD Alarm! Lower Slide Not Open is activated.
This message is shown when TVFD advanced is activated. TVFD-Al is only activated when using TVFD advanced.
ESC
OK
EMPTYING BIN
Open Lower
Slide Valve
Remaing Time
02:00s
Remaining Time: The remaining time for the valve to open before the alarm
is activated.
11
Summary of Contents for FlexPAK
Page 7: ...FlexPAK 2 7 ...
Page 54: ...FlexPAK PLC setting Default value Customer specific value 54 ...
Page 55: ...www nederman com ...