TRANSIT Ultimate | installation guide
6/40
2
Installation
2.1
Safety precautions
The following safety precautions should be observed during normal use, service and repair:
•
The TRANSIT Ultimate shall be connected to safety ground.
•
Disconnecting from (mains) power supply before removing any parts.
•
The TRANSIT Ultimate shall only be installed and serviced by qualified service personnel.
•
To be sure of safety, do not modify or add anything other than mentioned in this manual or indicated by NEDAP.
2.2
Installation guidelines
The TRANSIT Ultimate can be installed in any position. The normally expected read range is up to 10 meters. The
hinges should be on top of the reader.
Landscape installation – wide beam
Usually the reader is mounted in the horizontal
position. In this case the coverage area in the
horizontal plane is maximized. The horizontal beam is
80 degrees.
Portrait installation – narrow beam
In some applications a vertical installation is required
to make use of the smaller beam width in the vertical
plane. The vertical beam is 40 degrees. This can be
very useful in applications with multiple lanes to
prevent cross readings.
Wide 80°
Narrow 40°
