Nedap PowerRouter PR50SB-PR/S24, Installation Manual

Page: 37 / 52

PowerRouter • Back-up / Stand-alone • Installation Manual 5 Software installation tool
35
EN
5.5 Battery pack
You can change:
• Type of battery pack.
• Size of battery pack (only for 24V lead-acid batteries).
• Depth of Discharge for self-use.
• Depth of Discharge during grid failures.
CAUTION
Wrong settings may harm the batteries.
5.5.1 Battery charging
For 24V lead-acid batteries you can change:
• The charging procedure to float charging.
• The absorption voltage and float voltage.
• The charge current.
CAUTION
Wrong settings may harm the batteries.
5.5.2 Maintenance charge
Set the interval of when to perform the maintenance charge.
5.5.3 Self-use battery settings
Change specific battery setting to optimise self-use. With the
battery power limiter enabled, the battery will not be used to
compensate peak loads, but only for the base load.
5.5.4 Wintermode
Wintermode controls the usage of the battery module during
the winter period.