16
www.nedaplibrary.com
Monitor
This tab enables the different Monitor settings to be changed.
Monitor Enabled: when monitoring is enabled, the reader will send out UDP packets over the
network with the data of a detected RFID label. It will only do this when EAS is enabled.
Ip: Fill in the IP address of the pc where the UDP packets should be sent to
Port: Give the port number for connecting to the IP address. Default port is 7001
Notes
See the BiblioCheck4 Monitor document to see how the packets can be received and handled.
EAS needs to be turned on for the monitor function to work
For ISO15693 tags this function will only work when in AFI mode. Then the UID and data of a tag is
transmitted in a packet
When an optionally UHF module is connected, the EPC number of an UHF tag is transmitted in the data
field of the udp packet. The UID (or ID) field of the packet contains the 64bit truncated version of this EPC
number. See the BiblioCheck4 Monitor document.
All the settings of the configuration can be found in the RF.Test Lite manual (this manual can
also be found on the Nedap library support site).
