12
www.nedaplibrary.com
IP Networking
To change the IP-address of the reader, the reader needs to be connected with an RS232 or USB
connection to the pc. When a different IP-address is configured the changes are effectively
immediate, so when connected over the network, the connection will be lost immediately.
1.
Press the ‘Tuning’ button in the bottom right corner of the ‘Communication Setup’ window.
2.
RfTest.Lite will now read all the settings from the reader. This will take a few seconds. When
it has finished, the ‘Reader Settings’ window will appear.
3.
The ‘Reader Settings’ window has different tabs which all configure different settings. See
chapter 4 for a more detailed explanation of this window.
4.
Select the ‘IP Networking’ tab.
