ANPR ACCESS | INSTALLATION GUIDE
Configuration
30/36
Status Memory
= OK
Status Process
= OK
Status Time Synchro
= OK
Status OCR Camera
= OK
Status Plate Reader
= OK
5.3.6
DIGITAL I/O
The ANPR has a number of embedded digital inputs and outputs. Outputs are used
for external monitoring devices or for example control an electronic door lock.
Inputs are used as trigger sources. It is possible to check and modify the status of
digital outputs. This function is useful when checking the cabling after installation.
See also chapter 4.4 for details about the digital i/o connections.
Digital input
Green input icon indicates that the input is high (gray is low).
Click on the Refresh-button to update the states of the icons.
Digital output
Red output icon indicates that the output is high (gray is low).
Click on the digital output icon to change its state.
5.3.7
SYS STATISTICS
This page contains the statistics about data sending from ANPR to external devices.
The info in this page is very useful upon installation as they help check the available
bandwidths from ANPR to the data receiving servers.
In addition to this info, the page displays the statistics about synchronization with
the SNTP server. These statistics are updated when synchronization with time server
is enabled (see chapter 5.3.1).
Note
Only digital output 0 is
wired on the ANPR.