Installation and Configuration |
AEOS Blue and vehicle identification
EN
Manual version
3
27/48
4.3
Configuring AEmon
To configure the AEOS Blue controller for the ANPR Access reader in AEmon, take the following
steps:
Configure the identifier type in AEmon
1.
Start AEmon
2.
In AEmon, create/open the configuration, including the AP7803 AEOS Blue controller, the
IPBadge AEbc and the StandardDoor access point (see the
AEOS Access Points and
Entrances
manual).
3.
Right-click the StandardDoor AEbc, and click Properties.
4.
Open the Identifier type editor and select Generic.
Step
01
