NED XCM8085DLMT8, User Manual

Page: 25 / 89

25 NED
XCM8085DLMT8 UME-0060-04
4.1.4 Camera Control Commands
Table 4-1-4-1 shows the list of Camera Control Commands.
Table 4-1-4-1 Lists of Camera Control Commands
Control Item CMD VAL1 VAL2 VAL3 Control Description
Analog Gain gax 0 to 7 x1.00....x17.8
Digital Gain gdx 0 to 511 x1
…x2(x0.003906/step)
Digital Offset odx
-127 to
127
-127 to 127 (0.5DN/step at 8bit)
Exposure Mode inm 0/1/2 Free Run / Ext Edge / Ext Level
Output Tap tap 8/4/2 8tap / 4tap / 2tap(*1)
Display disp 0/1
0: one display for single line,
dual lines and 2x2 binning modes
1: two displays for 2disp-mode(2line)
Programmable
Exposure Time
(Setting line A and
line B together)
int 1(fix)
914 to
1048575
10.75
～
12336.2μs(*2)
Programmable
Exposure Time1
(for line A only)
inta
914 to
1048575
10.75
～ 12336.2μs(*2)
The values must be set as follows.
(ExposureTime1)
≧
(Exposure Time2
）
Programmable
Exposure Time2
(for line B only)
intb
914 to
1048575
10.75
～
12336.2μs(*2)
The values must be set as follows.
(ExposureTime1)
≧
(Exposure Time2
）
Memory
Initializing
rst Reset to factory settings
Memory Load rfd Readout setup data in memory
Memory Save sav Store present setup data in memory
Test Pattern tpn 0 /1 Off/On
Black Pixel
Correction
Data Save
blk
User arbitrary black pixel correction
data is acquired and stores it in the
memory.
White Pixel
Correction
Data Save
wht
User arbitrary white pixel correction
data is acquired and stores it in the
memory.
Pixel Correction
Setting
shc
0/1/2
/3/4/5
0 to 255
0: Correction Off
1: Factory black corr factory