NED
XCM8060SA_8040SA_6040SA
UME-0034-03
24
The pin assignment of the power supply connector is shown below.
Figure 3-3-4 Power Supply Connector (HIROSE : HR10G -7R- 4PB)
Round shape push-pull lock type
Table 3-3-2 Pin Assignment of Power Supply Connector
No
NAME
Color of Cable
1
12 -15V
White
2
12 -15V
Red
3
GND
Green
4
GND
Black
3.4 Power Supply
The camera requires a single power supply (DC+12 to +15V).
When selecting a power source, choose one with the capacity to allow for
inrush current. (15W or more recommended)
Insert the cable plug securely until it locks into position. This is to prevent
the connector from coming loose during power transmission.
Compatible Cable (Compatible plug):
DGPS -10 (HIROSE : HR10A -7P - 4S)
Power supply voltage:
DC+12 -15V (+/-5%)
Consumption Current (rated):
DC+12V : 500mA
The LED lamp illuminates when +12V to +15V power is being supplied to the
camera.
If the lamp fails to illuminate even after power is supplied, turn OFF power
immediately. Inspect wiring. Check the voltage and capacity of the supplied power
source.
1
2
4
3
