NED
XCM6040SAT2 UME-0027-03
34
4.2.16 Setting the Pixel Readout Direction
Sets the pixel readout direction.
Format 2 :
CMD
□
VAL1 CR
CMD : rev
VAL1 : 0,1 (0:Forward, 1:Reverse)
<Example>
rev
□
1 CR (Reverse)
>OK
>rev 1
4.2.17 Multi-Slope Level Settings
Sets the camera multi-slope levels
Format 4 :
CMD□VAL1□VAL2□VAL3 CR
CMD : msl
VAL1 : 0-15
VAL2 : 0-15
VAL3 : 0-15
Make certain that VAL1<=VAL2<=VAL3
<Example>
msl□0□5□10 CR (Sets multi-slope levels to 0, 5, 10)
>OK
>msl 0,5,10
4.2.18 Multi-Slope Timing Settings
Sets the camera multi-slope timing
Format 4 :
CMD□VAL1□VAL2□VAL3 CR
CMD : mst
VAL1 : 0-511
VAL2 : 0-511
VAL3 : 0-511
Make certain that VAL1
＜
=VAL2
＜
=VAL3. Also, when setting 3 non-zero
values (i.e. when using 4 slopes), select values such that VAL2/VAL1 and
VAL3/VAL2 work out to the same result. Moreover, the result should be less
than 10.
<Example>
mst□1□10□100 CR (Sets multi-slope timing to 1, 10, 100)
>OK
>mst 1,10,100
