NED
UME-0021-03 SU2020/SU2025
39
7 Troubleshooting
The following pages contain several troubleshooting charts that can help you find
the cause of problems users sometimes encounter.
7.1 No Image
The indicator is glowing.
The camera has the correct connections
with the power source and the
frame
grabber.
Use a power source that meets
the specifications.
The camera has the correct
connection with the frame
grabber.
カメラケーブルで、取込ボードと
正しく接続されている。
The camera may be out of
order. Please contact us
for service.
After power on,
the power source meets the
specified voltage.
The capacity of the power
source is sufficient
Connect the camera and the frame
grabber board with camera cables.
After being powered on, set up the
frame grabber board suitably.
The sample software program is used to control
the camera.
The sample software program is used to
control the camera and is communicating
with the camera successfully.
Confirm the communication software, the control
protocol for the camera and commands.
The power source meets the specified voltage.
The frame grabber board is
powered on and set up.
Yes
The frame grabber
is communicating
with the camera
successfully.
Yes
Yes
No
No
Yes
No
No
No
Yes
No
No
No
No
No
Yes
Yes
Yes
Yes
To next page
B
To next page
A
To next page
B
