NED
UME-0021-03 SU2020/SU2025
21
Explanation of Signals
Inner Shield :
Shield cable (GND)
X0+,X0-
…X2+,X2- : Data output (Channel Link)
Xclk+,Xclk- :
Clock output for above data output synchronization (Channel Link)
SerTC+, SerTC- : Serial data input (LVDS)
, SerTFG- : Serial data output (LVDS)
CC1+,CC1- :
External synchronous signal input (LVDS)
*When using External Trigger
CC2+,CC2- :
Not in use (LVDS)
CC3+,CC3- :
Not in use (LVDS)
CC4+,CC4- :
Not in use (LVDS)
Camera Link compatible cable
14B26 - SZLB - xxx - 0LC by 3M (or equivalent)
To avoid uncoupling of cable connectors during power on, make sure to clamp
them with locking screws.
Do not unplug the cable while power is being supplied to the camera.
The pin assignment of the power supply connector is shown below.
Figure 3-3-4 Power Supply Connector (HIROSE : HR10G -7R- 4PB)
Round shape push-pull lock type
Table 3-3-2 Pin Assignment of Power Supply Connector
No
NAME
Color of Cable
1
12 V
White
2
12 V
Red
3
GND
Green
4
GND
Black
1
2
4
3
