manualshive.com logo in svg

NEC XEN IPK DIGITAL TELEPHONE, Programming Manual, Page: 620 / 638

Share
Download
NEC XEN IPK DIGITAL TELEPHONE Programming Manual Download Page 620

December 2004

NEC Business Solutions Ltd

600 – Chapter 3  

DRAFT 3

Section 3, Software Installation

Doc. No.: 81

94 - Release 2.0

December 2004

SECTION 3

SOFTWARE 
INSTALLATION

Installing Xen  Maintenance Access Terminal (MAT) Software

1.

Insert the MAT setup disk 1 in your floppy drive.
(If installing the CD ROM version, insert Setup CD in the CD
ROM drive.)

2.

Click the Windows ( ) 

Start

 button.

3.

Select 

Run

.

4.

Enter 

a:\setup.exe

 and click OK.

(If installing from CD ROM, enter the letter of the CD ROM drive.)

5.

Follow the instructions on the PC installation program.

6.

To start the MAT program:

Click the Win 95 start button.
Select PROGRAMS, NEC Xen  MAT. 
Click Xen  Maintenance Access Terminal (MAT). 
Enter the password. The default password is PASSWORD in
uppercase letters.

SECTION 4

WIZARD

The 

Wizard

 organises system data assignments for programming individual

features. When the user selects 

Wizard

, the system provides a tabbed list

of information related to the selected feature.  

Wizard 

can be accessed by using the Wizard button from the toolbar or by

selecting 

Wizard

 from the File pulldown menu. (Refer to 

Figure 3-1:

Accessing Wizard

.)

Summary of Contents for XEN IPK DIGITAL TELEPHONE































































































































































































































































































































































































































































































































































































































































Reviews:

No comments