Installation Manual, Chapter 9 – Telephone Programming
169
November 2003, A6-506000-642-01(8508), Release 6.0
S
ECTION
4
P
ROGRAMMING
F
UNCTIONS
System Wide Settings
Programming
Note:
To change a default setting for function numbers 001, ó002, 018, 019 and 060
dial the number that corresponds to the setting position you want to change
(1
Ö
9 or 0, as appropriate). For example, to change the setting for 001-1, dial [1]
to toggle its setting between the two values
Function
Number
Function Name and
Telephone Display
Description
Programming Values
001–1
Internal Call Notification
P001 SYS SETUP 1
09–765432
–
Used to indicate how
users are notified of
internal calls. If Voice is
selected, users can voice
announce calls. If Signal
Tone is selected, the
system sends an audible
tone to the called party.
1 = Voice
– = Signal Tone
001–2
Speed Dial Assignment
09–76543
2
–
Used to assign the number
of speed dial memory
locations used for system
(common) speed dialling
and personal (individual)
speed dialling.
2 = 80 System/20 Personal
– = 400 Slots/0 Personal
(200 Release 2.0 and
below)
001–3
Not used
Programming
Note:
On DTB-Type telephones, any unused line keys can be assigned as one-touch
keys.
001–4
Ringing Transfer
09–765
4
32–
Used to enable or disable
ringing transfer for
external calls. If enabled,
the called party hears
ringing. If disabled, the
called party does not hear
ringing.
4 = Enabled
– = Disabled
001–5
Not Used
001–6
Trunk Line Direct
Access
09–7
6
5432–
Used to assign how an
outside line is accessed. If
enabled, the user can
press the designated line
to directly access the
outside line. If disabled,
the user must press the
designated line key and
then go off-hook (within
3 sec.) to access an
external line.
6 = Enabled
– = Disabled