166
Installation Manual, Chapter 9 – Telephone Programming
A6-506000-642-01(8508), Release 6.0, November 2003
Programming Guidelines
When programming you should understand the following:
The telephone display indicates the function number, function group name and
default settings.
When function numbers are grouped (e.g., 001-1
Ö
001-9), all of the function
numbers are displayed at the same time. To change between the default value
and the alternate value, press the dial pad key that corresponds to the last digit of
the function number you are changing.
For example:
When you access the function number for 001-1~001-9. The system displays:
If you want to change the programming value for Function 001-4, press
D
on the
dial pad. When “
–”
appears on the display, you have changed to the alternate
programming value for that function. The default value is displayed if this is
the first time you are using the system. If the system has been previously
programmed, the alternate value may be displayed instead of the default value.
It is important to note that the series of numbers is displayed in descending order
(987654321).
The following navigational keys are used. Note that the DTU-Type telephones do
not have a SPD key. The DTB-Type telephones use the
T
and
S
keys to
perform many of the same functions that the
Q
key does on the DTU-Type
telephones. Throughout this chapter any differences are noted where necessary.
Table 9-1:
Navigational Keys for Telephone Programming
Key
Description
S
Returns to the previous function. Repeatedly pressing this key allows you
to scroll backward through the function numbers.
M
U
Forwards to the next function. Repeatedly pressing this key allows you to
scroll forward through the function numbers.
L
L
Clears the display allowing you to enter a function number using the
dialpad.
N
P
Exits programming mode and returns the telephone to normal operation.
T
Q
The
T
key on DTB-Type Multiline telephones and
Q
on DTU-
Type Multiline telephones is used to enter a dash into a telephone number
K
J
Clears data that was entered using the dialpad.
P001 SYS SETUP 1
987654321
Function
Number
Default
Settings
Function
Group Name
P001 SYS SETUP
1
987653
Q
