NEC VT615 User Manual Download

Page: 27 / 157

2. Installation and Connections

To connect SCART output (RGB)

Before connecting: An exclusive SCART adapter (ADP-SC1) and a commercially available SCART cable are re-
quired for this connection.

NOTE: Audio signal is not available for this connection.

PC CARD

AUDIO IN

/MONO

VIDEO IN

S-VIDEO IN

DVI-I IN

COMPUTER IN

MONITOR OUT

DVI-I COMPUTER

AUDIO IN

AUDIO OUT

PC CONTROL

REMOTE

USB

COMPUTER IN

1. Turn off the power to the projector and your video equipment.

2. Use the NEC ADP-SC1 SCART adapter and a commercially available SCART cable to connect the

COMPUTER input of your projector and a SCART output (RGB) of your video equipment.

3. Turn on the power to the projector and your video equipment.

4. Use the COMPUTER button on the remote control to select the COMPUTER input.

5. Press the MENU button on the remote control to display the menu.

6. From the Advanced menu, select [Setup]

→

[Options]

→

[Signal Select]

→

[Computer]

→

[Scart].

SCART is a standard European audio-visual connector for TVs, VCRs and DVD players. It is also referred
to as Euro-connector.

NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in Europe. Contact your NEC dealer in Europe for more
information.

Projector

ADP-SC1

Female

To COMPUTER IN

Video equipment such as DVD player

Commercially available SCART cable

Summary of Contents for VT615






























































































































































Search results

Summary of Contents for VT615

Reviews:

Related manuals for VT615

Brands by name

Popular brands

NEC VT615, User Manual

Search results

Summary of Contents for VT615

Reviews:

Related manuals for VT615

Brands by name

Popular brands