17
Applications
"Microsoft
®
Office Single Image v15" is installed on this computer. To use Microsoft
®
Office, you need to purchase a product key separately.
By using the "Battery tool", you can automatically perform battery refresh,
performance diagnostics and battery refresh diagnostics.
Start the Battery tool as follows.
1
Click
on the start screen, and then click [Battery tool] on the
application screen.
2
When a general explanation screen for battery refresh and performance
diagnostics is shown, click [Next].
For Battery tool and diagnostic results, start the Battery tool, and click [Help] to read
the [Help] information.
For battery refresh and performance diagnostics, perform the following steps.
1
Start [Battery tool].
2
Click [Start].
A confirmation screen will be displayed.
3
After confirming the contents, click [Yes].
Battery refresh will start.
After battery refresh is complete, performance diagnostics will start.
Go to the [Control Panel], click [Programs]
[Uninstall a program], then select
[Battery tool] and click [Uninstall].
Follow the instructions on the screen for the procedure.
When reinstalling the uninstalled [Battery tool], perform the following steps.
1
Insert the "Application Disc" into the optical drive.
2
Click
on the start screen, and click [Run] on the application screen.
3
Enter the following in the [Open] dialog and then click [OK].
D:\NECBATT\w81\UTL\setup.exe
4
When [Welcome to the Battery tool Setup Wizard] is displayed, click [Next].
Microsoft
®
Office Single Image v15
Microsoft
®
Office Single Image v15 is not pre-installed in the Japanese version of
model VG26M/C-H.
"Microsoft
®
Office Single Image v15" is installed only at the time of shipment from the
factory. If you perform a recovery, it will no longer be installed. If you wish to use the
Microsoft
®
Office, purchase it from the Microsoft
®
website.
Battery tool
Starting the Battery tool
• By checking [Do not display this dialog box on startup.] and clicking [Next], the
general explanation screen will not be shown at the next start up.
• The general explanation screen is also displayed by clicking [Read first] after
[Battery tool] starts up.
Performing Battery Refresh and Performance Diagnostics
When performing battery refresh and performance diagnostics, the battery and the AC
adapter must be connected.
On the Confirmation screen or the executing screen, checking [Enter sleep status
automatically after completed.] will put the computer into sleep mode after battery
refresh and performance diagnostics is completed.
• To abort battery refresh, click [Stop], and follow the instructions on the screen. Also,
if battery refresh is aborted, performance diagnostics will not be performed.
• If the [Battery status] is [Deteriorative], the battery pack should be replaced.
• If the [Battery status] is [Warning], replace the battery pack. Also, the battery pack
cannot be charged or refreshed for safety reasons.
Uninstall
Reinstall
If the optical drive is not specified as "D", change the "D" to the appropriate drive
specification.
Summary of Contents for VersaPro VC
Page 26: ...MEMO ...
Page 27: ...MEMO ...